Quantcast
 
 
  Search
 
 
 
  DCB48-G CABINETIZED BATTERY SYSTEMS  
 
 
Telecom Production Area
 

Product Definition

The DC Micro Boss and DC Boss cabinet frame are constructed of welded steel and are designed to meet Seismic Zone 4 requirements when floor anchors are used. These cabinetized battery systems include cabinet, batteries, fuses, internal cabling and hardware to construct the system. The battery systems described below currently use C&D, and Power Battery batteries. Additional vendors, with equivalent or superior product may be added to this list.

Product Selection

  • Check the switch configuration. When it is complete, determine the Amps of 48 Volts that configuration will require.
  • Select the batteries to supply the Amps you need for the time required using the selection chart below.

Available Options

  • Low Voltage Disconnect - to protect batteries.
  • Meters, Volt and Ammeter - to measure battery status.
  • Output Bus Bars - instead of power blocks.
  • Output Breakers - to match customer's individual equipment load requirements.
  • System Breakers - to disconnect the battery from the load.
  • J Boxes - to parallel cabinets for more amps or time.
  • Casters - two fixed and two swivel with locks.
  • Floor loading rails - to spread the weight and reduce floor loading.

Notes

  • DC Mini Boss cabinets are NEMA type 1 enclosures.
    DC Micro Boss cabinet is a NEMA type 1 enclosure. Designed for Seismic Zone 4 locations when floor anchors are used.
    DC Boss cabinets are UL listed NEMA type 1 enclosures. Designed for Seismic Zone 4 locations when floor anchors are used.

Model # Part # Typical Amp Hour Ratings
Cut Off @ 1.75 V/Cell
1hr - 2hr - 4hr- 6hr - 8hr
Rack Size
L"xW"xH"
Approx. Weight
lbs.
Floor
Load

lbs/ft2
Fuse Size

DC Mini Boss Battery Systems
RB48-1G30 A012222 20 12 7 5 4 17x14x14 145 88 30 Amp
RB48-1G45 A012223 32 19 11 7 6 28x14x14 205 75 60 Amp
RB48-1G70 A012224 48 28 16 11 9 28x14x14 260 96 60 Amp
RB48-1G90 A012225 50* 35 20 14 11 28x14x14 335 123 60 Amp
RB48-1G125 A012186 50* 48 27 19 15 28x14x14 445 164 60 Amp

DC Micro Boss Battery Systems
DCU48-2G70 A012226 96 56 32 22 18 24x21x37 580 166 60 Amp
DCU48-2G90 A012227 100* 70 40 28 22 24x21x37 720 206 60 Amp
DCU48-2G125 A012228 100* 96 54 38 30 24X21X37 940 269 60 Amp
 

DC Boss Battery Systems
DCB48-2G90 A012229 100* 70 40 28 22 20x36x45 850 170 60 Amp
DCB48-2G125 A012230 100* 96 54 38 30 20x36x45 1080 216 60 Amp
DCB48-3G90 A012231 150* 105 60 42 33 20x36x45 1160 23221 60 Amp
DCB48-4G90 A012232 200* 140 80 56 44 28x36x45 1500 214 60 Amp
DCB48-3G125 A012233 150* 144 81 57 45 20x36x45 1500 300 60 Amp
DCB48-5G90 A012234 250* 175 100 70 55 28x36x45 1770 253 60 Amp
DCB48-4G125 A012235 200* 192 108 76 60 28x36x45 1940 277 60 Amp
DCB48-6G90 A012236 300* 210 120 84 66 28x36x45 2100 300 60 Amp
DCB48-5G125 A012238 250* 240 135 95 75 28x36x45 2360 337 60 Amp
DCB48-7G90 A012237 350* 245 140 98 77 28x36x78 2540 363 60 Amp
DCB48-8G90 A012239 400* 280 160 112 88 28x36x78 2840 406 60 Amp
DCB48-6G125 A012240 300* 288 162 114 90 28x36x45 2770 396 60 Amp
DCB48-9G90 A012241 450* 315 180 126 99 28x36x78 3140 449 60 Amp
DCB48-7G125 A012242 350* 336 189 133 105 28x36x78 3320 474 60 Amp
DCB48-10G90 A012243 500* 350 200 140 110 28x36x78 3440 491 60 Amp
DCB48-8G125 A012244 400* 384 216 152 120 28x36x78 3730 553 60 Amp
DCB48-9G125 A012245 450* 432 243 171 135 28x36x78 4150 593 60 Amp
DCB48-10G125 A012246 500* 480 270 190 150 28x36x78 4560 652 60 Amp


* 83% of maximum fuse rating

Model Number Definition

DCB 48 - 3 G 90
DCB = Type of system
DCB = DC Boss
DCU = DC Boss, Micro
RB = DC Boss, Mini
48 = Voltage of system
3 = Number of battery strings
G = Type of battery
90 = Battery Amp hour rating

 
 
 
© 2008 MAGNETEK, INC.

Overview | DC Power Systems | Batteries & Backup Solutions | Parts & Accessories | Indoor Cabinets
Outdoor Enclsoures | Mobile Communications Solutions | Monitoring Equipment | Power Distribution Products
Literature Request | Manuals | Brochures | Warranty | News | Events | Technical Support | Magnetek | Contact Us